Easy to Install
The iPECS Ethernet Switches have plug and play capabilities such as Auto negotiation of speed and duplex mode, Auto-MDI / MDIX, at-a-glance intuitive status LEDs right on top of the ports. And also its intuitive web user interface makes the installation and administration much easier.
Advanced Quality of Service (QoS)
Prioritization of the data on the network is essential in order to ensure that mission critical applications such as voice are delivered in a timely manner. The iPECS Ethernet Switches are able to classify packets into different priority queues and deliver each packet in the priority queues using WRR (Weighted Round Robin) or SPQ (Strict Priority Queuing) method.
Flexible Power over Ethernet
The Ericsson-LG iPECS Ethernet POE switches are designed to support both 802.3af and 802.3at standard POE. Therefore, SMBs can flexibly and costs effectively connect standard and high powered devices on a single Ericsson-LG PoE switch. In addition, the PoE control and monitoring can be easily managed via the intuitive GUI interface. (POE models only)*
iPECS Ethernet Switches incorporate the latest green Ethernet technology to help you save energy costs. The switches use either Energy Efficient Ethernet (EEE) or are able to detect link status and cable length allowing each port to dynamically configure providing maximum power efficiency. (Gigabit models only)*
iPECS Ethernet Switches support key security features like RADIUS authentication and authorization as well as multi-layer filtering. The web management sessions can be secured with HTTPS encryption.
Smart Management using UDM
Ericsson-LG offers an unique management tool, the Unified Device Manager (iPECS UDM), which enables the management of all iPECS product lines from IP Telephony to Data Networking via a single management interface. iPECS UDM simplifies network administration and management through the use of a single consistent and familiar interface.
The ELG switching Gibabit PoE fabrics are better in particular where up to 11 ports can supply a maximum 34.2W via our ES-3052GP model (Gigabit PoE) of power simultaneously to connected devices (802.3at), up to 25 ports can supply up to 15.4W (802.3af), or all 48 ports can supply up to 7.5W (802.3af).
Intelligent PoE Switching
The switch’s power management enables total switch power and individual port power to be controlled within a configured power budget. Port power can be automatically turned on and off for connected devices, and a per-port power priority can be set so that the switch never exceeds its allocated power budget. When a device is connected to a switch port, its power requirements are detected by the switch before power is supplied. If the power required by a device exceeds the power budget of the port or the whole switch, power is not supplied.The switch automatically detects attached PoE devices by periodically transmitting test voltages that over the Fast Ethernet or Gigabit Ethernet copper-media ports. When an IEEE 802.3af or 802.3at compatible device is plugged into one of these ports, the powered device reflects the test voltage back to the switch, which may then turn on the power to this device. When the power inline compatible command is used, this switch can detect IEEE 802.3af or 802.3at compliant
|iPECS ES-4500G Series Layer 3 provides speedy Gigabit performance combined with high availability. This switch family offers Gigabit Ethernet edge ports, 10 Gigabit Ethernet uplinks, and redundant power options to allow numerous installation options based on application requirements. The management software is ready for future requirements today by including both IPv4 and IPv6 Management options without additional cost.|